Glock 17 Serial Number Lookup - A very common question for new Glock buyers is "What generation is my Glock?" Before the release of the fourth generation, Glock did not officially recognize only the model numbers, promoting the perception that "Glock is Glock is Glock - they are all the same." But early collectors noticed the differences and unofficially settled on three main iterations, or "generations", to classify them by. The nomenclature became so common that Glock followed suit with the Gen 4 in 2008, and their promotional literature now highlights the previous Gens in some places.
The images below will help you clearly identify which generation the Glock is a part of, but be aware that the model transition is slow as there is a lot of overlap. Also, 3rd gen guns are still in production due to California gun restrictions, so you can have a 5th gen. weapons that are actually older than the 3rd gen. The image notes indicate key features that are consistent throughout a generation, but slight changes in markings and interior can be found at different intervals - and sometimes back and forth - within the same group. Therefore, the strict breaks between generations indicate only significant revisions of the framework, many parts are interchangeable with two or more parts, but some changes last only for a short time within a generation.
Glock 17 Serial Number Lookup
The first generation was a generation of constant change. The original design, while reliable, was still being developed. One consistent feature is the grip texture that covers the entire handle (no checkering on the front or back strap). It has a softer sound compared to newer generations and has been praised by collectors as having a 'pebble texture'. Early rifles had a thin, stainless steel barrel with a parkerized finish that was introduced early (no later than the AD prefix) and increased barrel wall thickness no later than the AN prefix. There are also several variations in the magazines, boxes and small internal parts. All firearms will have Austrian inspection marks, but not consistent placement or number of marks. Very early (pre-US) rifles and those intended for European markets do not have a serial number plate on the frame. Most early guns were also equipped with target sights, which became known as "weak sights" due to their fragility. The standard (fixed) sights are also period correct, although you will have to pay a premium for the target version. All frames had a crescent relief at the bottom of the front straps, except for the few 19's made.
A Different Kind Of Reporting Assignment: Build A Glock 19
Generation 2 is what many novice collectors or even uninformed dealers will refer to as “1. generation". The confusion is due to two factors: 1. Members of the first generation are very rare and may not have been previously seen by many casual observers. 2. Many models were introduced in the second generation line and are considered by some to be “1. generation' because it is the first release of that particular model. To clarify things, if you have a model 20 or later, you have a Gen 2 Glock, even though it is the first version of the gun. A clear difference between models 1 and 2 in 17-19 is the addition of checking to the front and back straps, as well as a change in the texture of the side panels (deeper than the 1 generation). 2 also introduced 5 additional calibers and all non .380/9mm pistols were equipped with a second locking block pin to prevent frame cracking from heavier recoil. It is important to note that the number of pins does NOT represent a generation as many believe. 9mm frames only have two studs from Gen 1 to Gen 3. for production, while all other calibers will have 3 studs. All full size frames are carried on the relief at the bottom of the front strap.
By the late 1990s, Glock had become a dominant force in the American pistol market, and other manufacturers sought to copy the design. This led to some pressure to "create" the Glock design to try to stay ahead of everyone else. The Gen 3 changes actually started with the release of the subcompact models in 1995. It was thought that the handle would be too small for many to hold, so finger grooves were incorporated into the front strap to try and increase purchase and restraint. rotation due to recoil. It started with a 3-year transition period until all the changes hit all models in '98. Some of the larger frame transition patterns are quite rare (especially in ported variations) - see https:///transitional/ for more information. The Gen 3 will have finger grooves on the front strap, thumb rest inlets at the top of the handle, and an accessory rail built into the dust cover. As mentioned above, ONLY 9mm calibers will still find the 2-pin design during the early run of Gen 3. In the early 2000s the frames were simplified to all 3 pins.
By the time the fourth generation was released, the Glock had become a ubiquitous "handgun", but was once again challenged by a more innovative design. One of the ideas that consumers liked was the interchangeable backstraps to better adjust the grip for different hand sizes. Glock first experimented with narrower grips on the Gen 3 SF models (they were only available in .45 and 10mm calibers). The modular backstrap system brought SF proportions to all frames with two larger size options and even beaver tail adapter inserts. The internals were redesigned from the ground up and were actually made with the recoil profile of the .40S&W in mind, then scaled down to 9mm (where the Gen 1-3 was designed the other way around). This should make the .40 models more durable while maintaining the legendary reliability of the 9s. The grip texture was also changed to more aggressively patterned side panels, again first experimented with a short run of late Gen 3 guns with the so-called "RTF2" texture. The RTF2s are technically Gen 3, possibly Gen 3.5, and were only produced (except for period specials) from 2009 to 2011 - see the image at the bottom of this page.
The first Gen 5 models were actually preceded by the new narrow-line subcompact models 42 and 43. These models started with all new internal components redesigned to accommodate the smaller dimensions, and the FBI played a role in these changes. for larger guns with their demand for M models. The 19X, 42, 43, 43X, 44, 45, and 48 technically do not have a Gen 5 designation on the slide, but are still closely aligned with Gen 5 guns the other. The 17 and 19 were officially released as Gen 5s in 2017, followed by other offerings in 9mm and .40 S&W, but no .357 Sig, 10mm, or .45 ACP offerings have been produced to date . Major changes to note include the removal of the "shooter" barrel, fully ambidextrous controls, flared stripes, and toe grooves of the front stripes.
New For 2023: Davidson's Exclusive Gunsite Glock
There are (at least) two other models you may encounter that actually fall outside the generation gap or are different enough to be difficult to identify from the above discourse: 1. RTF2 the third generation and 2. FBI M series.
RTF2 is short for 'raw texture framework, version two'. The first version was only made as a prototype and was never released, although at least one is on display at the Cody Firearms Museum. The designers chose the second version and new shapes were made to incorporate this grip texture into the standard design of the 3rd generation. All internal parts are the same, so the only difference would be the texture of the handle. As you can see from the exploded view, the entire handle is covered in little pyramids, and let me tell you, they are sharp! This gun will really stay in your hand even when wet. Glock sold them primarily to the police between 2009 and 2011, but the design is a clear step between the third and fourth generation firearms. The pyramid concept was carried forward but with larger pyramids as the RTF2 pyramids were subject to wear and tear as well. See https:///rtf2g/ for more pictures.
Finally, we should also talk about the FBI's M-series pistol. The 17M and 19M actually preceded and probably inspired the Gen 5 guns. They were made to specifications requested by the FBI as a new service weapon for the department and incorporated some design changes from the mini 42/43 models as well some new ideas. These were the first Glocks with ambidextrous controls and rifling modifications designed to improve accuracy. From the outside, however, the M pistol will look and perform almost exactly like the Gen 5, with the main differences being internal, so most collectors consider them part of the Gen 5 family. However, for the good person, that "M" added to the model tag will make a big difference in the price you want.
Furnace serial number lookup, dell serial number lookup, cisco serial number lookup, trane serial number lookup, rolex serial number lookup, glock serial number lookup, guitar serial number lookup, glock 17 serial number, hvac serial number lookup, glock 23 serial number lookup, gun serial number lookup glock, glock 17 serial number list
0 Comments